Best.Nr.0200 13.2mm Hole Diameter Flow Control Solenoid Valve Coil
Because micro-motors, electrical appliances, transformers or meters
and other industries have high requirements on the number of turns
of their solenoid coils, and some even do not allow half-turn
errors. Therefore, the number of turns of the winding machine must
be accurate and reliable. Our company uses a fully automatic
winding machine to produce Best-Nr0200 Type Solenoid Coil to ensure
the accuracy of the number of coil turns.
The number of turns of the coil is reflected by the number of turns
of the winding machine main shaft. The number of turns is then
converted into a pulse signal by a reed sensor, shaped by a shaping
circuit, and converted into a square wave, which is differentiated
to trigger the counter. When the input given signal composed of the
single-pole two-position switch coincides with the counting signal
of the counter, that is, when the number of turns required to be
wound is consistent with the number of turns that have been wound,
the circuit-compliant door is It is turned on, and the signal is
sent to the controller, so that the winding motor is immediately
stopped, thereby ensuring the accuracy of the lap control.
Technical parameter of Best-Nr0200 Type Solenoid Coils:
| Model Number | BB13241002 |
| Normal voltage | DC24V/AC220V; other voltage can be customized |
| Normal power | AC:18VA DC15W |
| Insulation class | H, F |
| Connection type | DIN43650A |
| Application | Water solenoid valve |
| Weight | 137.5 g |
| Hole size | 13 mm |
| Height | 41 mm |
Main dimension of 0200 type water solenoid valve coils:
Deconstruction picture of AC220V/DC24V solenoid coil for water
electromagnetic valve:
Normally Close 0200 Pulse Solenoid Valve Coil Inner Hole 13mm
Height 41mm:
Enameled wire is widely used, mainly in: inductors, VCM,
transformers, solenoid coils, sensors, frequency transmitters,
radar detection devices, etc., involving many fields of electronic
components.
Definition of solenoid coil enameled wire (self-adhesive enameled
wire & non-self-adhesive enameled wire):
The solenoid coil enameled wire is made of a high-purity,
high-conductivity conductor covered with an insulating coating,
namely: conductor + insulating paint + adhesive layer =
self-adhesive enameled wire
Self-adhesive enameled wire is a special enameled wire, which is
because its special processing properties make the manufacture of
the coil simple and easy. The wound coil can be bonded and formed
by heating or solvent treatment, and the molding method is simple,
and is widely applied to the manufacture of various complicated or
non-skeletal electromagnetic coils. The application of
self-adhesive enameled wire also brings significant social and
economic benefits, which can simplify the coil forming process,
improve work efficiency, save energy, improve environmental
pollution, facilitate industrial production, and contribute to
sustainable development.
The self-adhesive enameled wire has a composite structure, that is,
a layer of adhesive paint is applied to the outer surface of the
ordinary enameled wire (baseline). At present, China attaches great
importance to the development of composite insulating enameled
wire, which has the characteristics of good variety and good
performance. Since the composite layer enameled wire is coated with
two to three layers of different materials, it is compatible with a
variety of different paint characteristics compared with the single
layer of wire, which solves the problem that a single material does
not meet the production requirements. In the self-adhesive enameled
wire structure of the composite layer, the insulating varnish
mainly guarantees the insulation performance of the wire, and the
second outermost viscous lacquer is mainly used to meet the needs
of the coil forming process, and acts as a bonding and protects and
enhances the baseline.
Welcome to your inquiry!
