G1/2'' Male Threaded Water Dispenser Reverse Osmosis RO Solenoid Valve

BPV05-M 1/2'' male thread reverse osmosis solenoid valve.Made of high quality material, safe, hygiene and durable.Fit for reverse osmosis RO water system, water purifier, washing machine, water dispenser, etc..

Inlet solenoid valve Blockage (assuming other components are complete)

Phenomenon: No pure water and waste water or water production rate is greatly reduced

Solution: Clean the filter screen of the solenoid valve and clean with water.

Phenomenon: The water inlet solenoid valve cannot be closed, causing the waste water to flow after the shutdown

Solution: Tap with something to make the stuck impurities flow out with the water or replace the water inlet solenoid valve.

Technical data:

Main Dimension of RO Solenoid Water Valve:

Brando Factory Production of Solenoid Valves:

More Plastic Reverse Osmosis Solenoid Valve(RO SV):

Reverse Osmosis systems

A simple reverse osmosis system consists of a high-pressure pump which increases the pressure of the feed water with salts, ions or impurities. This forces the water across the semi permeable RO (Reverse Osmosis) membrane, leaving behind all the dissolved salts. The required pressure is directly proportional to the salt concentration of the inlet water. The higher the concentration, the higher pressure is required to overcome the osmotic pressure.

The RO membrane lets the cleaner water through and this is called permeate water. The salts and other contaminants which are stopped by the membrane come out as a reject stream. This can be drained out or recycled if possible through the RO system to save water.

The RO systems remove up to 99% of dissolved salts (ions), particles, pathogens and bacteria from feed water.

Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on