2/2 Way NC Brass Guide Tube Solenoid Valve Stem Armature Plunger

The name system 9 stands for a modular system of solenoid coils, armature systems, solenoid operators. The diameter of the armatures of all valve components is approximately 9 mm. This value is the major characteristic of this type series. The components' efficiency has been increased to the optimum in years of simulation, construction and practical testing. Since the diameter of the armature is a major determining factor, its selection is of great technical importance.

The armature assembly or anchor system is the valve piece of solenoid valve system. An internal stainless steel poppet moves up and down to seal on the top and bottom valve seats. Brando provides armatures in multiple sizes depending on the application’s flow requirement. The OD tube sizes range from 5mm to 30mm and flow ranges from 12 l/min to 165 l/min. The valve seat orifice sizes ranges from 0.6mm to 6.0mm and higher for special applications. Choose the correct material for the application as brando offers tubes in brass and stainless steel.

Solenoid Valve Stem:

Picture	Dimension	Model	S9
		Funtion	2 Way / 3 Way, Normally Closed
		Seat Connection	Flange, Thread
		Core Tube Material	Brass, Stainless Steel
		Seal Material	NBR, FKM
		Voltage	All range of AC and DC available
		Customize Service	Provided, Pls show us sample or drawing

Picture	Dimension	Model	EVI 7/9
		Voltage	12VDC, 24VDC, 24VAC, 110VAC, 220VAC
		Power	DC: 3-8W 6W AC: 4-8VA
		Fitted Armature Plunger	S9
		Fitted Valve	Pneumatic Valve

Brando Solenoid Valve Stem Production Video:

Solenoid Valve Stem Categories:

*According to tube OD: 5-7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, Up to 30mm.

*According to tube material: Brass, Stainless Steel

*According to valve application: Our armatures are widely used in pneumatic, hydraulic, fluid control fields, covering textiles, home appliances, automobiles, refrigeration, dust collector and other automation control industries.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on