AC 220V DC 24V 1 Inch DD Series Goyen Type CA25DD Pneumatic Pulse
Valve With Thread Connection
Pulse Jet Valve Maintenance:
Before conducting any maintenance activity on the system ensure
that components are fully isolated from pressure and power
supplies. Pressure and power should not be reapplied until the
valve has been fully assembled.
Diaphragm and pilot inspection should be conducted annually.
Features of Our Performance Solenoid Valve Which is Similar as
CA/RCA25DD Type:
1, Environmentally endurance tested at the extremes
2, Proprietary engineering thermoplastic elastomer blend for
consistent performance throughout the temperature and pressure
range
3, 1 MILLION CYCLES guaranteed
4, NO spring failures
5, Cleans more filter area per valve than before
6, Class leading performance coupled with extremely rapid response
Air Clean System Diaphragm Pulse Jet Valve Construction:
| Number | Part Name | Material |
| 1 | Solenoid coil | Copper wire |
| 2 | Armature aseembly | 430FR SS |
| 3 | Small top cap | Alumininum, ADC |
| 4 | Middle cap | Alumininum, ADC |
| 5 | Small spring | 304 SS |
| 6 | Diaphragm seat | PA-66(standard), Viton or Nitrile coated mild steels, Nitrile,
Viton or High Density PE |
| 7 | Top cap | Alumininum, ADC |
| 8 | Big spring | 304 SS |
| 9 | Bolts and Screws | 302 or 304 SS |
| 10 | Diaphragm seat | PA-66(standard), Viton or Nitrile coated mild steels, Nitrile,
Viton or High Density PE |
| 11 | Valve body | Alumininum, ADC |
| 12 | Nut | Alumininum, ADC |
| 13 | Seal mat | SS302 |
| 14 | Seal rubber | NBR |
1 Inch DD Series Pneumatic Pulse Valve , Diaphragm Valve
CA electro-magnetic pulse valve is a right-angle valve, with the 90
angle between the inlet and outlet, which is suitable for the
installation connection between the gas dome and the bag house blow
tube to provide good air flow and dust clean pulses satisfying the
requirement.
Valve body and cover are pressure die cast aluminum alloy .
Normally, diaphragms are made from Buna N elastomer, and are
suitable for temperatures ranging from -40 degrees F to 180 degrees
F. Viton material diaphragms are option for high temperature
applications.
1 Inch DD Series Pulse Jet Valve Technical Parameters:
| Part No. | CA25DD |
| Operating pressure | 0.3~0.8MPa |
| Ambient temperature | -5~55℃ |
| Relative humidity | ＜85% |
| Fluid | Clean air |
| Voltage | AC110V, AC220V, DC24V |
| Electric current | 0.46A, 0.23A, 0.8A +-10% |
| Diaphragm life | More than 1 milion cycles |
| Orifice Diameter | φ 25mm |
| Nominal Port Size | G1" |
Detailes of G1" Nominal Port Size Diaphragm Pulse Jet Valve And
It's Overall Dimensions:
Pulse Valve Characteriestic And Performance
| Part No. | Nominal Port Size (mm) | Nominal Port Size (Inch) | Number of Diaphragms | Flow (Kv) | Flow (Cv) |
| BGD25 | 25 | 1" | 1 | 20 | 23 |
| BGD45 | 40 | 1 1/2" | 2 | 44 | 51 |
Pulse Jet Valve Installation:
1, Prepare supply and blowtube pipes to suit valve specification.
Avoid installing valves underneath the tank.
2, Ensure tank and pipes are free from dirt, rust or other
particulate.
3, Ensure supply air is clean and dry.
4, Mount valves to inlet pipes and blowtube to valves, ensuring no
excess thread sealant can enter the valve itself.
5, Apply moderate pressure to system and check for installation
leaks.
6, Fully pressurise system.
7, Test fire and listen for proper actuation and crisp pulse noise.
Detail Of CA25DD Goyen Type Solenoid Valve In Dust Collector
System:
Tips: All accessories can be sold separately as repair parts
(Diaphragm, Solenoid Coil, Armature Assembly)
Youtube Video Of 1 Inch Goyen Type CA25DD Solenoid Valve For Dust
Collector:
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
