QR DIN 43650A Connector Goyen Type Right Angle Shape Oulet At 90 to
Inlet Aluminium Body CA62T 2 1/2 Inch Pulse Valve
Description:
CA Series solenoid pulse jet valve, type: CA20T, CA25T, CA45T,
CA50T, CA62T, CA76T.
We have two types right angle type & in line type, with different
connection form.
It is 2-way dust collector valve used for pulsing large volumes of
air into filter bags for particulate removal.
These series are high-flow fast-opening 2-way valves, pilot valves,
pilot valve enclosures and bulkhead fittings that have been
specially designed for use in dust collector systems. It can work
at least 1 million times without any problem.
Specifications of 2 1/2 Inch Pneumatic Pulse Jet Valve CA62T
1)Type: Right angle (vertical) & in line solenoid pulse valve.
2)Bore: 20, 25, 35, 40, 50, 62, 76, 100mm
3)Port Size; 3/4"~ 3"
4)Connection Form: Normal screw; A: Tubing+thread; S: Double
diaphragm; DD: Pipe connecting; J: Threaded(economical type)
5)Working Pressure: 0.3~0.8MPa
6)Ambient Temperature: -5~55° C
7)Humidity < 85%
8)Applied Medium: Pure air
9)Diaphragm life: Above 1 million times
10)Voltage: DC24V, AC110V, AC220V
11)Reference type: CA20T, CA25T, CA45T, CA50T, CA62T, CA76T
Dimensions of Pulse Jet Valve CA62T:
Goyen Type Pulse Jet Valve 2 1/2" CA62T:
| No | Description | Standard Material |
| 1 | Body, cover | aluminium die cast ca313 |
| 2 | Bleed pin | Turned aluminium |
| 3 | Diaphragm Assembly | Buna N, Buna N Rubber |
| 4 | Spring | ss304 |
| 5 | Screws | ss304 |
| 6 | o-rings | Buna N, Nitrile |
| 7 | Plunger Assembly | 430FR SS |
| 8 | Ferrule, Iron Top Assembly | 305 stainless steel |
| 9 | Coil | 130° rated nylon encapsulaton |
| 10 | Washer | Pressed aluminium |
| 11 | Clip | Mechanical plated steel |
CA62T Pulse Valve Electrical Details:
| Coil Voltage | 200/240 vac, 100/120 vac, 24 vac, 24 vdc, 12vdc |
| Coil connection | QR-DIN 43650A connection, QD conduct entry |
Installations of Pulse Valve Goyen Type CA62T:
Installation
1. Prepare supply and blowtube pipes to suit valve specification.
Avoid installing valves underneath the tank.
2. Ensure tank and pipes are free from dirt, rust or other
particulate.
3. Ensure supply air is clean and dry.
4, Mount valves to inlet pipes and blowtube to valves, ensuring no
excess thread sealant can enter the valve itself.
5. Make electrical connections to solenoid or connect RCA pilot
port to pilot valve (RCA valves only).
6. Apply moderate pressure to system and check for installation
leaks.
7. Fully pressurise system.
8. Test fire and listen for proper actuation and crisp pulse noise.
Application example of CA62T:
